• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

Inventory of Environmental Impact Decisions for Food Contact Substance Notifications

  • Print
  • Share
  • E-mail
-

This is a listing of the environmental decisions for food contact substance notifications. Each listing comprises an index, which is the Food Contact Notification (FCN) number, an abbreviated identity for the corresponding food contact substance (FCS), the assessment of environmental impacts prepared according to the National Environmental Policy Act (NEPA) and FDA’s determination of the potential environmental impacts.

Not all environmental documents may have been included in the inventory of decisions. Some documents or portions of some documents may not be displayed because they contain information and data that are protected from disclosure under 18 U.S.C. 1905, 21 U.S.C. 331(j) or 360j(c), or their distribution is protected by copyright. Additional information about environmental terms used in this listing and the basis for environmental decisions are available through the NEPA submission.


Search and display hints:

  • Select the FCN number below to view single record details.
  • To sort by a specific field, click on the column header for that field.
  • To browse the records, use the Show All, First/Previous/Next/Last, and Jump To options at the bottom of the data table.
  • To obtain the FDA Decision Memo or Categorical Exclusion (Cat Ex) Memo for a Food Contact Substance Notification, select the appropriate term, if available, in the FDA Decision column.
  • If an Environmental Assessment (EA) was required to be submitted by industry, it is available in the NEPA Submission column.
  • To search for a specific substance/term, enter the term in the Search box and select Show Items to display only those records that contain the selected term. (The search results also includes terms not shown on this page, but included in the full record on the detail page.)
  • The search results will return hits of records containing words that include the search term. For example, a search for the color red will return results that include terms such as reduce, ingredient, and manufactured. To limit results to only the searched term, place a space before and after the word in the basic search or in the advanced search “this exact phrase” field.

More about Environmental Decisions and Definitions of Environmental Terms.

Download Inventory of Environmental Impact Decisions for Food Contact Substance Notifications data in Microsoft Excel web format Download data from this searchable database in Excel format. If you need help accessing information in different file formats, see Instructions for Downloading Viewers and Players.
Search within these results
Records Found: 1674 Show All Page 1 of 34
FCN No Food Contact Substance NEPA Submission FDA Decision
820 2-Propenoic acid, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl ester, polymer with α-(1-oxo-2-propen-1-yl)-ω-hydroxypoly(oxy-1,2-ethanediyl). Cat Ex 25.32(i) Cat Ex Memo
827 2-propenoic acid, 2-hydroxyethyl ester, polymer with α-(1-oxo-2-propen-1-yl)-ω-hydroxypoly(oxy-1,2-ethanediyl), α-(1-oxo-2-propen-1-yl)-ω-[(1-oxo-2-propen-1-yl)oxy]poly(oxy-1,2-ethanediyl) and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-propenoate (CAS Reg. No. 1012783-70-8). Cat Ex 25.32(i) Cat Ex Memo
888 2-propenoic acid, 2-hydroxyethyl ester, polymer with α-(1-oxo-2-propen-1-yl)-ω-hydroxypoly(oxy-1,2-ethanediyl), α-(1-oxo-2-propen-1-yl)-ω-[(1-oxo-2-propen-1-yl)oxy]poly(oxy-1,2-ethanediyl) and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-propenoate (CAS Reg. No. 1012783-70-8). Cat Ex 25.32(i) Cat Ex Memo
933 2-propenoic acid, 2-methyl-, polymer with 2-hydroxyethyl 2-methyl-2-propenoate, α-(1-oxo-2-propen-1-yl)-ω-hydroxypoly(oxy-1,2-ethanediyl) and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-propenoate, sodium salt (CAS Reg. No. 1158951-86-0). Cat Ex 25.32(i)
and EA

(in PDF, 848 kB)
Cat Ex Memo/FONSI
1044 2-propenoic acid, 2-methyl-, 2-hydroxyethyl ester polymer with 1-ethyenyl-2-pyrrolidinone, 2-propenoic acid and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-propenoate sodium salt (CAS Reg. No. 1206450-10-3). Cat Ex 23.32(i)
EA

(in PDF, 1.7 MB)
Cat Ex Memo/FONSI
1360 2-Propenoic acid, 2-methyl-, 2-(dimethylamino)ethyl ester, polymer with 1-ethenyl-2-pyrrolidinone and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-propenoate, acetate (CAS Reg. No. 1334473-84-5). Cat Ex 25.32(i)
and (j)
Cat Ex Memo
1451 2-Propenoic acid, 2-methyl-, 2-(dimethylamino)ethyl ester, polymer with 1-ethenyl-2-pyrrolidinone and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-propenoate, acetate (CAS Reg. No. 1334473-84-5). Cat Ex 25.32(i)
and (j)
Cat Ex Memo
1493 Copolymer of 2-(dimethylamino) ethyl methacrylate with 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl methacrylate, N-oxide, acetate (CAS Reg. 1440528-04-0) Cat Ex 25.32(i) Cat Ex Memo
599 Copolymer of perfluorohexylethyl methacrylate, 2-N,N-diethylaminoethyl methacrylate, 2-hydroxyethyl methacrylate, and 2,2'-ethylenedioxydiethyl dimethacrylate, acetic acid salt (CAS Reg. No. 863408-20-2) or malic acid salt (CAS Reg. No. 1225273-44-8). Cat Ex 25.32(i) Cat Ex Memo
604 Copolymer of perfluorohexylethyl methacrylate, 2-N,N-diethylaminoethyl methacrylate, 2-hydroxyethyl methacrylate, and 2,2'-ethylenedioxydiethyl dimethacrylate, acetic acid salt (CAS Reg. No. 863408-20-2) or malic acid salt (CAS Reg. No. 1225273-44-8). Cat Ex 25.32(i) Cat Ex Memo
1186 Butanedioic acid, 2-methylene-, polymer with 2-hydroxyethyl, 2-methyl-2-propenoate, 2-methyl-2-propenoic acid and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methyl-2-propenoate, sodium salt (CAS Reg. No. 1345817-52-8). Cat Ex 25.32(i) Cat Ex Memo
1676 2-propenoic acid, 2-methyl-, 2-hydroxyethyl ester, polymer with 2-propenoic acid and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methyl-2-propenoate, sodium salt (CAS Reg. No. 1878204-24-0). Cat Ex 25.32(i) Cat Ex Memo
1 Silver sodium hydrogen zirconium phosphate, rhombohedral framework structure, of the general formula AgxNayHzZr2(PO4)3 with x=(0.1-0.5); y=(0.1-0.8); z=(0.1-0.8) EA FONSI
2 GENOXTM EP, chemically identified as Amines, bis(hydrogenated rape-oil alkyl)methyl, N-oxides (CAS Reg. No. 204933-93-7) EA FONSI
3 Styrene-acrylic copolymers produced by polymerizing a minimum of 72 parts by weight of styrene with a minimum of 4 parts of methyl methacrylate and with up to 10 parts total of any one or more of the following monomers: butyl methacrylate, methacrylic acid, butyl acrylate, acrylic acid and allyl methacrylate EA FONSI
4 Isophthalic acid or dimethyl isophthalate EA
(in PDF, 3.50 MB)
FONSI
5 Polybutadiene - graft - poly(methyl acrylate- co-acrylonitrile) (CAS Reg. No. 27012-62-0) EA
(in PDF, 1.70 MB)
FONSI
6 Completely hydrolyzed copolymer of acrylonitrile and trivinylcyclohexane ion-exchange resin (CAS Reg. No. 109961-42-4) EA FONSI
7 Woven wool felt EA FONSI
8 Ethylene terephthalate-2,6-naphthalate copolymers EA
(in PDF, 1.59 MB)
FONSI/EA Supplement
9 Poly(oxy-1,2-ethanediyloxycarbonyl-2,6 -naphthalanedicarbonyl) homopolymer and copolymers with ethylene terephthalate EA
(in PDF, 3.83 MB)
FONSI/EA Supplement
10 Pyromellitic dianhydride EA FONSI
11 4,5-dichloro-2-n-octyl-3(2H)-isothiazolone EA FONSI
12 Industrial starch modified by treatment with greater than 5% and not more than 21% by weight 2,3-epoxypropyl trimethylammonium chloride (CAS Reg. No. 3033-77-0) EA FONSI
13 Dimethyl 2,6-naphthalenedicarboxylate or 2,6-naphthalenedicarboxylic acid EA
(in PDF, 1.53 MB)
FONSI
14 Dimethyl 2,6-naphthalenedicarboxylate or 2,6-naphthalenedicarboxylic acid EA
(in PDF, 3.83 MB)
FONSI
15 Benzenesulfonic acid, 2,2'-(1,2-ethenediyl)bis(5-((4-(bis(2-hydroxyethyl)amino)-6-((4-sulfophenyl)amino)-1,3,5-triazin-2-yl)amino)-, tetrasodium salt (CAS Reg. No. 16470-24-9) EA FONSI
16 Cemented carbide formulated as follows: Tungsten Carbide(WC) - 95%, Carbides of titanium, tantalum and niobium - 5%, Cobalt(Co) - 0.5%-1% EA FONSI
17 A perfluorocarbon-cured elastomer (PCE) produced by terpolymerizing tetrafluoroethylene (CAS Reg. No. 116-14-3), perfluoro(2,5-dimethyl-3,6-dioxanone vinyl ether) (CAS Reg. No. 2599-84-0) and perfluoro (6,6-dihydro-6-iodo-3-oxa-1-hexene) (CAS Reg. No. 106108-22-9) and subsequent curing of the terpolymer (CAS Reg. No. 106108-23-0) by crosslinking with triallylcyanurate (CAS Reg. No. 101-37-1) and vulcanizing with 2,5-dimethyl-2,5-di(t-butylperoxy) hexane (CAS Reg. No. 78-63-7), as a 68% dispersion on finely divided silica EA FONSI
19 Piperylene / 2-methyl-2-butene / α-methylstyrene terpolymers (Benzene, (1-methylethenyl)-, polymers with 2-methyl-2-butene and 1,3-pentadiene) (CAS Reg. No. 62258-49-5) EA FONSI
20 2,2'-Methylenebis(4,6-di-tert-butylphenyl) 2-ethylhexyl phosphite (CAS Reg. No. 126050-54-2) EA FONSI
21 2,2'-Methylenebis(4,6-di-tert-butylphenyl) 2-ethylhexyl phosphite (CAS Reg. No. 126050-54-2) EA FONSI
22 Phosphorous acid, cyclic neopentanetetraylbis(2,6-di-tert-butyl-4-methylphenyl) ester (CAS Reg. No. 80693-00-1) EA FONSI
23 C.I. Pigment Red 277, a solid solution of 1-naphthalenesulfonic acid, 2-((2-hydroxy-6 -sulfo-1-naphthalenyl)azo)-, stronium salt (1:1) (CAS Reg. No. 250639-69-1) and 2-naphthalenesulfonic acid, 5-((4-chloro-5-ethyl-2-sulfophenyl) azo)-6-hydroxy-, strontium salt (1:1) (CAS Reg. No. 197566-90-8) EA FONSI
24 Tin-based alloy, ASTM B23-49 Grade 1, for filling bearings made from extruded or molded carbon and graphite, which has the following composition: Tin (Balance); Antimony (4.0-5.0%); Copper (4.0-5.0%); Lead (0.004% maximum); Iron (0.05% maximum); Aluminum (0.005% maximum); Zinc (0.005% maximum); Arsenic (0.005% maximum); Bismuth (0.005% maximum); Total other elements (<0.005% maximum). EA FONSI
25 1-Naphthalenesulfonic acid, 2-((4,5-dihydro-3-methyl-5-oxo-1-(3-sulfophenyl)-1H-pyrazol-4-yl) azo)-, calcium and/or strontium salt (1:1)(C.I. Pigment Yellow 209 and C.I. Pigment Yellow 209:1) EA FONSI
26 A solid solution of 2-naphthalenesulfonic acid, 5-(((5-chloro -4-methyl-2- sulfophenyl) azo) -6-hydroxy)-, strontium salt (1:1) and 2-naphthalenesulfonic acid, 5-((4-chloro -5-ethyl -2-sulfophenyl) azo) -6-hydroxy)-, strontium salt(1:1) (C.I. Pigment Red 276) EA FONSI
27 C.I. Pigment Orange 79 (Benzoic acid, 4-((2-hydroxy- 6-sulfo-1-naphthalenyl)azo)-, strontium salt (2:1)) EA FONSI
29 Tridecanol phosphite condensation product with butylidenebis(2-(1,1-dimethylethyl)-5-methyl-4,1-phenylene) (CAS Reg. No. 13003-12-8) EA FONSI
30 Copolymer of the sodium salt of acrylic acid with polyethyleneglycol allyl ether(CAS Reg. No. 137898-98-7) EA
(in PDF, 827 kB)
FONSI
31 Fluorescein, disodium salt or dipotassium salt (CAS Reg. No. 518-47-8) and (CAS Reg. No. 6417-85-2) EA
(in PDF, 265 kB)
FONSI
32 α-(dinonylphenyl)-ω-hydroxypoly(oxy-1,2-ethanediyl) containing not more than 21 moles of ethylene oxide per mole of dinonylphenyl (CAS Reg. No. 9014-93-1) EA
(in PDF, 333 kB)
FONSI
33 Silica, ((ethenyldimethylsilyl)oxy)- and ((trimethylsilyl)oxy)-modified (CAS Reg. No. 68988-89-6) EA
(in PDF, 211 kB)
FONSI
35 Dimethyl dicarbonate EA FONSI
36 Gum rosin (CAS Reg. No. 8050-09-7) EA FONSI
37 Dimethylolbutanoic acid, (CAS Name: butanoic acid, 2,2-bis(hydroxymethyl)-,) (CAS Reg. No. 10097-02-6) EA FONSI
38 n-Octyl phosphonic acid (NOPA)-modified titanium dioxide (produced by chemically reacting NOPA (CAS Reg. No. 4724-48-5) with titanium dioxide to achieve a treatment level of 0.85 percent by weight of NOPA on the pigment). EA
(in PDF, 468 kB)
FONSI
39 1,2-Bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyl)hydrazine (CAS Reg. No. 32687-78-8). EA
(in PDF, 65 kB)
FONSI
42 A grafted copolymer of cross-linked sodium polyacrylate identified as 2-propenoic acid, polymers with N,N-di-2 propenyl -2-propen -1-amine and hydrolyzed polyvinyl acetate, sodium salts, graft (CAS Reg. No. 166164-74-5) EA
(in PDF, 1.42 MB)
FONSI/EA Supplement
43 Nickel-iron alloy. Its composition is as follows: Ni (80-83 percent by weight), S (0-0.005 % by weight), C (0-0.005% by weight), Mo (1-3% by weight), Fe (14-19% by weight). EA FONSI

Show All 

jump to page of 34 


FCN No Food Contact Substance NEPA Submission FDA Decision
-
-